Introduction and definitions This post is a part of a serie of post about Multicast operation from the most basic setup to a much complicated one (scenario that include more routing and receiving opti...
This blog is a part of a serie of blogs about multicast routing: Previously we’ve introduced multicast routing and PIM protocol operation in dense mode. In this blog, we’ll check the opera...
This post is a part of a serie of posts that introduce the operation of multicast routing: We explore in this post, the operation of PIM multicast routing protocol in the by default operation mode PIM...
In this post we review a basic multicast routing operation, step by step using output from routers console and traffic packet capture (using wireshark). In the above test lab, Servers send multicast t...
In our test network R1, R2 and R3 are in the same RIP routing domain All these routers are configured for a PIM-SM mode operation The RP address is set to R3’s fa1/0 interface Notice that each route...